Testing Equipment.

---

LIST OF IN HOUSE TESTING EQUIPMENTS:

• Compressive Strength Testing machine- 200 M.T. Capacity
• Reversible Thermal Expansion Upto 1000 Deg.C
• Permanent Linear Change Furnace-15000C
• Permanent Linear Change Furnace-17500C
• Muffle Furnace- 12000CDrying Oven : 3000C
• Digital Controller Drying Oven : 3000C
• Planetary Mixture
• Sieve Set (BIS)
• Gang Moulds( As per BIS & ASTM)
• Flexural Strength
• Physical Balance
• Chemical Balance
• Platinum Crucible
• Gas Burner
• Distillation Plant
• Vibrating Table for Casting Mould
• Hydrometer
• Thermal Conductivity Testing Machine (10000C & 13000C )
• Digital CCS Machine -250 KN
• MOR- 4 KN, 10 KN & 30KN
• Electronic Balance
• Digital Vernier
• Humidity Cabinets With 90% Relative Humidity
• Spectrophotometer
• Pyrometric Cone Equivalent upto 2000 Deg.C
• Refractory Under Load upto 1600 Deg. C
• Core Drill

TEST CONDUCTING AT OUR LAB:

• Chemical Analysis
• Sieve Analysis
• Bulk Density
• Specific Gravity
• Apparent Porosity
• Water Absorption Test
• Acid Resistant Test
• Cold Crushing Strength
• Flexural Strength/MOR
• Bond Strength
• Absorption in Toluene Testing
• Heating & Firing in different Temp. for evaluation of compressive strength
• Drying Shrinkage.
• Thermal Conductivity at Mean Temperature up to 12000 C
• PLC upto 1750o C
• Reversible Thermal Expansion upto 10000C
• Setting Time of Mortar and Castables
• Pyrometric Cone Equivalent (PCE) up to 38 ORTON CONE
• Refractory Under Load Temperature 16000 C
• Spalling Cycle Test

TESTING EQUIPMENTS:

• Sieve Analysis , Vibrating Table, Planetary Mixture, Vicat Apparatus
• Chemical Analysis-Alumina, Iron, Silica & Ti0₂
• B.D./W.A.
• Specific Gravity
• Apparent Porosity
• C.C.S. Machine, Gang Moulds, Pyrometer
• Muffle Furnace, P.L.C. Furnace, Thermal Conductivity Furnace, Dryer etc.

For other Testing, arrangement with M/S SAIL REFRACTORY UNIT, IFICO LTD.